Part 2 One Way Magnetic Shielding The Holy Grail The Secret Revealed Part 2

The long awaited video that reveals the secret behind the One Way Magnetic Shielding. However, shielding is just the half of it. The other half is the exact position of the stator verses the angel of approach of the oncoming magnets. At all times only like poles are used as the primary pole. This means that the magnets approaching the stator will be two like poles that must be able to easily pa**each other in close proximity. This approach is what I call the back door to my stator, where one of the like poles have been heavily shielded. However if you over shield the like pole, than the approaching magnet will want to stop or slow down when the approaching magnet sees all that metal shielding on the stator. To neutralize this challenge, we must allow some of the "like pole" to bleed through the shielding. When the right amount leaks through, it neutralizes/balances both the drag effect of the shielding itself as well as the counter drag caused by two like poles. When we get this equal between the two hurdles, the approaching magnets with two like poles pa**right on by the back edge of the stator with the greatest of ease!! Now that the like poles have pa**ed the backdoor of the stator easily, the back edge of the pa**ing magnets pa**es the edge where the shielding stops! ... only to be suddenly thrusts forward which in turn thrusts the next magnet in line behind it into the awaiting shielded stator, only to repeat this all over again and again. The torque of this is enormous on such a small scale. On a large scale there would be plenty to power a car or power up a home. Do to security reasons, I will not contact anyone via personal email addresses. Here is the URL I told you about. You will have to complete the URL address yourself because I do not want YouTube to have any reasons to suspend my account. To copy my videos, go to: (dvdvideosoft) by simply adding the dot and com to the end of their name: dvdvideosoft "One Way Magnetic Shielding" "James Roney Stator" "Fuel-less Magnetic Motor" "Rare Earth Magnets" "Neodymium" "Stator" "Magnetic Motor" (Parts list found in description) I am using the following magnets: ---------------------------------------- ------ 1"x1"x1/4" N42 Square Neodymium Magnets Part Number: BX0X04 1"x1/4" Neodymium ring magnets with 1/4"hole in middle. Part number RX054-N52 2"x1"x1/4" - N52 Neodymium magnets. Part number: BY0X04-N52 I've been buying them at: K. J. Magnetics A Great Source For The Worlds Strongest Magnets! http://www.kjmagnetics.com You need a set of 36 of each, with the exception that you only need 4 bar magnets, 8 at the most. The right magnets are not cheep, but in the bigger scheme of things it's well worth the extra money. Hope this helps. _ Category: Science & Technology Tags: magnetic shielding fuel less motor stator rare earth magnet free energy design blueprint friction one way




Social Bookmark This!

diggdeliciousfurltechnoratistumbledGoogle BookmarkYahoo Bookmarksphinn

(From "Energy Unsorted" category)

tags

   magnetic shielding fuel less motor stator rare earth magnet free energy design blueprint friction one way   

magnetic shielding fuel less motor stator rare earth magnet free energy design blueprint friction one way

embed this on your site



Comments

Submitted by:
thedude
media:126

 

log in to subscribe